Home Insulation Services Rochester, NY
Is your home in need of insulation in Rochester, NY? Look no further than Coler Natural Insulation! We offer many different types of insulation for any part of your home. Different approaches must be taken depending on the goals of the homeowner, budget, and the way the house is laid out. We are able to speak with each homeowner to educate them on our products and the benefits of each. Coler has been serving the Rochester, NY community since 2005 and would love to help you insulate your entire home.
Signs Your Home Needs Insulation
Fluctuating Temperatures: Are you noticing that one room is very warm, while others are cold? With a poorly insulated home, inconsistent temperatures will be very noticeable varying from each room.
Walls, Floors or Ceilings are Cold: If you can touch your walls, floor,s or ceilings and they are cold, that means the heat is not staying trapped inside your home and that poor/lack of insulation could be the problem.
Ice Dams in Gutters: Sometimes when heat escapes your home, it does so on the roof, causing any snow or ice to melt. The water flows into the gutters but can refreeze and cause a major blockage and treacherous icicles.
High Energy Bills: Insulation can affect the temperature of your home during hot and cold months. When not taken care of, this can cause your heating and cooling systems to run around the clock, costing a lot of money.
Contact Coler for Home Insulation
Contact our dedicated team of experts to speak about your home insulation needs today!
What is the R-Value of SprayFoam Insulation per inch?
R-value is derived from a controlled laboratory test of insulation’s resistance to conductive heat flow. Open cell has an R-value of up to 4.0/inch. Closed cell has an R-value of up to 7.0/inch.
What is the R-Value of a Spray Foam insulated wall or ceiling?
In the wall or ceiling of a building, most factory-made insulation materials suffer a reduction in performance due to air leakage and infiltration. The insulating value of many building components may be as low as 50% of the nominal R-Value of the insulation they contain.
However, the insulation of a wall containing spray foam will perform better or equal to the laboratory tested R-Value of the material because of its air infiltration elimination and long-term performance.
